Aluminum-magnesium-manganese alloys for roofing and exterior walls are generally pre-rolled (Coil Coated), with good color difference control, uniform paint film and quality stability, high environmentally friendly, etc. Commonly used thickness is 0.7-1.2, common type models are…

SAP is usually made by 2.0, 2.5 and 3mm non-combustible solid aluminium panel. SAP is made from 1100 or 3003 Grade Aluminium.
SAP Solid is pre-finished in a coil coated PVDF 70% Kynar coating. This means no powder-coating or other coating fabrication required giving you savings…

Hello, everyone. Here we would like to introduce one of our popular products - Color Painted Aluminium Plate Sheet for Safety Traffic Sign.
Pre-painted (Color Coated) aluminum alloys coil is firstly painted on the surface of the aluminum plate with good color difference control…

Freezer Sandwich Panel is manufactured from high grade Aluminium (5005 5052) throughout with skin thickness of 0.8mm top skin and 0.8mm rear skin, combined with B2 firefroof level polyurethane core.
We supply high glossy white color coating aluminum coil / sheet for making this…

We supply high glossy white silver... all kinds of Embossed White Aluminum Trim Coil for Decoration.
Alloy: 5052 H34
Size: 0.65mm*572mm*600m
Top Coating: PE High Glossy Off White 25 microns
Back Coating: PE High Glossy Silver 25 microns
T-bend: 90 degree bending without…

Perforated Aluminum Ceiling Panel is made by 0.7/1.0/1.2mm thickness, color coated aluminium panels with a high reflective value of 82 percent. In order to improve the acoustics, the ceiling panels are perforated.
We supply solid / matellic color coating aluminum coil / sheet…

HCP is manufactured from high grade Aluminium (3003 3005 5005) throughout with skin thickness of 1.0mm top skin and 0.7mm rear skin, separated by a ‘honeycomb type’ Aluminium core. HCP Panel’s interior is firmly joined to the external aluminium skins providing exceptional…

Aluminum gutters coil are made by .027'', .032'' thickness, 3005 or 3105 alloy high quality aluminum coil with color coating on one side or both sides.
This is probably the most common type of gutter that is currently available, and for good reason as they are incredibly…

Aluminum open cell ceiling Panel is made by 3xxx (3003/3105) series alloy, 0.4/0.5/0.6mm thickness, color coated aluminium panels. Open Cell Ceilings enable architects to design an open ceiling with high-performance aluminium. Systems are available as lay-in, lay-on or…

Acoustic Baffle Strip Aluminum Ceiling is made by 3xxx (common 3105) series alloy, 0.7/1.0/1.2mm thickness, color coated aluminium panels. Linear Ceilings enable architects to design an open ceiling with high-performance aluminium.
This aluminium strip is therefore rigid,…

NCP is manufactured from high grade Aluminium (5005 5052 )throughout with skin thickness of  0.7mm top skin and 0.5mm rear skin, separated by a ‘egg carton type’ Aluminium core. Unlike other non-combustible and fire proof panels and sheets NCP Aluminium does not use mineral…

.019'' (0.48mm) thickness for siding and soffit, .024'' (0.6mm) thickness for siding and fascia.
Aluminum gutters coil are made by .027'', .032'' (0.68mm, 0.81mm) thickness, 3005 or 3105 alloy high quality aluminum coil with color coating on one side or both sides.
Soffit refers…

Aluminum Linear ceiling Panel is made by 3xxx series alloy, 0.6/0.7mm thickness, color coated aluminium panels. Linear Ceilings enable architects to design an open ceiling with high-performance aluminium. Systems are available as closed or open.
We supply color coating aluminum…

Popular thickness: 0.5-1.5mm
Surface: Gloss / Embossed(Stucco) / 5 bars
Paint: PPG FEVE Coating
T-bend: 90 degree

1. Baffle Ceiling
are ideal for creating atmosphere within a room space. They are particularly suited for remedial installation on concrete ceilings where a distinctive design or improvement to the acoustic sound is required. A sound baffle is a construction or device that…

1. SAP Solid Aluminum Panel (Thickness: 2.0, 2.5, 3.0mm)
Solid aluminium panels are a sustainable alternative for other panels for ventilated facades.
Coil coated panels are available up to 3.0 mm as semi-finished aluminium products. Alloys, mechanical properties and coating…

Aluminium roller shutters enhance both your property’s appearance and its energy-efficiency. They offer a wide range of design options and customised convenience and increase the overall efficiency of buildings.

1. High Standing Seam Roof Panel  (Popular Thickness: 0.9-1.0mm)
The 65mm high standing seam panel adopts an upright locking system. The aluminum alloy T bracket is fixed with purlin, and the roof panel and the plum bracket of the T bracket are engaged with the edger.
In…