Professional Color Prepainted Aluminum Coil Materials for Roof Wall Ceiling Gutter
Tel: +86-539-8351788
Ph: +8613053995566
E-mail: ella@aluminumcoil.cn
Hot Product
Products  
Hot ProductRoof & Gutter Use AluminumCeiling Use AluminumFacade Use AluminumTransport Materials UseOEM Grain PatternComposite Materials UseRoller Shutter Use

2.0 2.5 3.0mm Color Coating Aluminum Coil Sheet for SAP Solid Aluminum Panel Wall Facade

Pre-painted (Color Coated) aluminum alloys coil is firstly painted on the surface of the aluminum plate with good color difference control and uniform paint film. It has the ability to be folded during fabrication without any detriment to the surface. For example, PVDF paint has high weather resistance, can be guaranteed 15 - 20 years color warranty.  



SAP is usually made by 2.0, 2.5 and 3mm non-combustible solid aluminium panel. SAP is made from 1100 or 3003 Grade Aluminium. 

SAP Solid is pre-finished in a coil coated PVDF 70% Kynar coating. This means no powder-coating or other coating fabrication required giving you savings with cost, lead times, double handling and damage.




  • Alloy: 3003 H24

  • Thickness: 3.0mm

  • Width: 1.5m

  • Color: RAL 7047 Telegray

  • Top Coating: PVDF 35 microns PPG Brand

  • T-bend: 90 degree bending without cracking

  • Application: SAP



  • Alloy: 3003 H24

  • Thickness: 2.5mm

  • Width: 1.3m

  • Color: OEM Wood Grain

  • Top Coating: PVDF 35 microns

  • T-bend: 90 degree bending without cracking

  • Application: SAP




  • Alloy: 1100 H24

  • Thickness: 2.5mm

  • Width: 1.5m

  • Color: OEM Brick Grain

  • Top Coating: PVDF 35 microns

  • T-bend: 90 degree bending without cracking

  • Application: SAP


SAP Solid can be rolled or curved. It is high impact resistant, lightweight, high durability, cost effective panel. Suitable for all weather conditions. The service life under normal environment is 3 times that of ordinary color aluminum plate and 2 times that of stainless steel. It is generally recognized as roofing and exterior wall materials with a design life of more than 50 years.


(SAP sample from our customer)

  



All our pre-coat aluminium finishes are tough and hardwearing, although if you are looking for an extended warranty then PVdF is an option. This is our paint finish pre-coated aluminium that has the ability to be folded during fabrication without any detriment to the surface.



Our colour range is extensive. We can provide a wood / marble / brick / camouflage grain finish SAP panel with colour matching being customerized as your design.



Contact us for free samples!






Prepainted Aluminum provides a very high quality painted surface in a wide array of colours and textures.  The paint films are generally thinner than post-applied films, but they still give better performance for longer. So, you use less paint and cut down or even eliminate maintenance and re-painting. 

The industrialised nature of coil coating not only gives the best assurance of quality, batch after batch, but means that environmental impacts are dealt with at source, efficiently and with the minimum of environmental impact - far less than in post-applied paint shops.




A. From raw materials to process treatment, we cooperate with well-known brands with stable quality and reputation of the industry.

B. Adopting the German technology, through the three-times coating and baking, 12 testing procedures to ensure that no paint shedding, bumps, coating voids.

C. The advanced colorimeter and error-detecting facility on thickness to ensure the quality.

D. The introduction of 8 advanced production lines from Germany, including four color layer lines, two cutting lines, two embossing lines, and a new production line of the protective film.

E. Full sets quality inspection: include the control of raw materials, the measurement of thickness and color difference during production, as well as the measurement of thickness and bending of products before packing.


Packing Terms

Standard sea export packing, wooden pallets with plastics protection for the sheet/plate;

15-20MT can be loaded into 20' and 40'container;
The other packing can be made based on the customer requirement.
Delivery time 3~8 days workdays ( in Stock);
10~25days workdays ( out of Stock).
Means of transportation By sea, Main port: Qingdao, Tianjin, Shanghai, Dalian, Quanzhou, Guangzhou, Shenzhen   
By rail, Inland port: At mohe port, Fuyuan port, Suifenhe port, Alataw Pass, Pingxiang port.


2.0 2.5 3.0mm Color Coating Aluminum Coil for SAP Solid Aluminum Panel Wall Facade


Ask us for price & sample!

Contact us for Sample & Quotation

© Shandong Hengzhan Building Materials Co., Ltd. color coated aluminum coil