2.5mm Thick PVDF Painted Aluminium Sheet Coil for Wall Facade Panel
Time: 2020-02-06 22:49 Views: 108 Author: Snow
2.0 - 3.0mm Solid Aluminum Sheet in our Workshop, welcome to our factory to know more information!
Pre-painted (Color Coated) aluminum alloys coil is firstly painted on the surface of the aluminum plate with good
color difference control and uniform paint film. It has the ability to be folded during fabrication without any
detriment to the surface. For example, PVDF paint has high weather resistance, can be guaranteed 15 - 20 years
All our pre-coat aluminium finishes are tough and hardwearing, although if you are looking for an extended
warranty then PVdF is an option. This is our paint finish pre-coated aluminium that has the ability to be folded
during fabrication without any detriment to the surface.
Prepainted Aluminum provides a very high quality painted surface in a wide array of colours and textures.
The paint films are generally thinner than post-applied films, but they still give better performance for longer.
So, you use less paint and cut down or even eliminate maintenance and re-painting.
The industrialised nature of coil coating not only gives the best assurance of quality, batch after batch,
but means that environmental impacts are dealt with at source, efficiently and with the minimum of
environmental impact - far less than in post-applied paint shops.
A. From raw materials to process treatment, we cooperate with well-known brands with stable quality and reputation of the industry.
B. Adopting the German technology, through the three-times coating and baking, 12 testing procedures to ensure that no paint shedding, bumps, coating voids.
C. The advanced colorimeter and error-detecting facility on thickness to ensure the quality.
D. The introduction of 8 advanced production lines from Germany, including four color layer lines, two cutting lines,
two embossing lines, and a new production line of the protective film.
E. Full sets quality inspection: include the control of raw materials, the measurement of thickness and color difference during production,
as well as the measurement of thickness and bending of products before packing.
Standard sea export packing, wooden pallets with plastics protection for the sheet/plate;
15-20MT can be loaded into 20' and 40'container;
The other packing can be made based on the customer requirement.
3~8 days workdays ( in Stock);
10~25days workdays ( out of Stock).
Means of transportation
By sea, Main port: Qingdao, Tianjin, Shanghai, Dalian, Quanzhou, Guangzhou, Shenzhen
By rail, Inland port: At mohe port, Fuyuan port, Suifenhe port, Alataw Pass, Pingxiang port.