Professional Color Prepainted Aluminum Coil Materials for Roof Wall Ceiling Gutter
Tel: +86-539-8351788
Ph: +8613053995566
Facade Use Aluminum
Hot ProductRoof & Gutter Use AluminumCeiling Use AluminumFacade Use AluminumTransport Materials UseOEM Grain Pattern

3.0mm Thickness PVDF 70% Kynar Coating Aluminium Coil Sheet for Solid Aluminium Cladding SAP

3.0mm Thickness PVDF 70% Kynar Coating Aluminium Coil Sheet for SAP 

Product Introduction

3003 is the representative alloy, having improved strength without impairing processing properties and corrosion resistance of pure aluminum with the addition of Mn. This can be applied to various usages such as ware, building materials and containers, etc.

3.0mm Thickness PVDF 70% Kynar Coating Aluminium Coil Sheet

Pre-painted (Color Coated) aluminum alloys coil is firstly painted on the surface of the aluminum plate with good color 

difference control and uniform paint film. It has the ability to be folded during fabrication without any detriment to the 

surface. For example, PVDF paint has high weather resistance, can be guaranteed 15 - 20 years color warranty.

All our pre-coat aluminium finishes are tough and hardwearing, although if you are looking for an extended warranty 

then PVdF is an option. This is our paint finish pre-coated aluminium that has the ability to be folded during fabrication 

without anydetriment to the surface.

SAP Solid is pre-finished in a coil coated PVDF 70% Kynar coating. This means no powder-coating or other coating 

fabrication required giving you savings with cost, lead times, double handling and damage.

Product Details Show

Product Parameters

1. Aluminum Alloy & Temper: 1100 or 3003 H24                                               

2. TCT: 1.5mm - 3mm

3. Width: up to 1600mm                                                     

4. Length: 3000mm, 6000mm, 9000mm
5. Color: RAL Color System, Wood Grain, Marble grain, Camouflage, brick... Any design you like                                

6. Paint: PVDF
7. Coating Thickness: 35 - 45um                                                        

8. Gloss: 5, 20, 30, 45
9. T-bend: 90 degree bending without cracking                                                                     

10. Application: Wall Cladding Materials - SAP

Product Processing

Production Process

unwiding---skimming(remove the oil and aluminum coil and aluminum debris)---cleaning---neutralization

(neutralize the residue inside the degreasing tank)---cleaning---chromizing(form chelete film to enhance adhesion 

between aluminum plate and coating)---drying---baking---cooling(by blowing, soaking and circulating water guiding system)---winding

T & D

Testing & Quality Control

A. From raw materials to process treatment, we cooperate with well-known brands with stable quality and reputation of the industry.
B. Adopting the German technology, through the three-times coating and baking, 12 testing procedures to ensure that no paint shedding,

bumps, coating voids.
C. The advanced colorimeter and error-detecting facility on thickness to ensure the quality.
D. The introduction of 8 advanced production lines from Germany, including four color layer lines, two cutting lines, two embossing lines, 

and a new production line of the protective film.
E. Full sets quality inspection: include the control of raw materials, the measurement of thickness and color difference during production, 

as well as the measurement of thickness and bending of products before packing.


SAP Solid can be rolled or curved. It is high impact resistant, lightweight, high durability, cost effective panel. Suitable for 

all weather conditions. The service life under normal environment is 3 times that of ordinary color aluminum plate and 2 times 

that of stainless steel. It is generally recognized as roofing and exterior wall materials with a design life of more than 50 years.

SAP Solid is perfect materials of wall cladding panel for high-rise building, hospitals and Schools. By pre-rolled (Coil Coated) 

aluminum, with good color difference control, uniform paint film and quality stability, high environmentally friendly, etc.

Our Team

Product Packing

Customerized Package & Delivery

Standard sea export packing.

1. Craft Paper Coverage

2. Wood frame reinforcement.

3. Steel ring attached to protect the edge.

4. Non fumigation pallets.

5. Moisture-proof measures.

3.0mm Thickness PVDF 70% Kynar Coating Aluminium Coil Sheet for Solid Aluminium Cladding SAP 

Contact Us for Sample & Price !

Contact us for Sample & Quotation

© Shandong Hengzhan Building Materials Co., Ltd. color coated aluminum coil