Aluminum 1100 is among the softest aluminum alloys and therefore is not used for high-strength or high-pressure applications. Though it is often cold-worked, pure aluminum can be hot-worked as well, but more frequently, aluminum is shaped by spinning, stamping and drawing processes, none of which require the use of high heat. These processes produce aluminum shapes in the form of foil, plates, round bars or rods, sheets, strips, and wire. Aluminum 1100 can also be welded; resistance welding is possible, but it can be difficult and usually requires the attention of skilled welders.
Aluminum 1100 is just one of several common aluminum alloys and is soft, low strength and, at 99% min aluminum, is the commercially pure aluminum. Copper, iron, magnesium, manganese, silicon, titanium, vanadium and zinc comprise the remaining elements. It cannot be hardened by heat treatment and is very formable.
Pre-painted (Color Coated) aluminum alloys coil is firstly painted on the surface of the aluminum plate with good
color difference control and uniform paint film. It has the ability to be folded during fabrication without any detriment
to the surface. For example, PVDF paint has high weather resistance, can be guaranteed 15 - 20 years color warranty.
All our pre-coat aluminium finishes are tough and hardwearing, although if you are looking for an extended warranty
then PVdF is an option. This is our paint finish pre-coated aluminium that has the ability to be folded during fabrication
without anydetriment to the surface.
1. Aluminum Alloy & Temper: 1100/3003 H24
2. TCT: 1mm
3. Width: 1500mm
4. Length: 3000mm
5. Color: RAL 9016 Traffic White / RAL 9017 Traffic Black
6. Paint: PE
7. Coating Thickness: 25-35um
8. Gloss: 10, 30, 60, 90
9. Application: Traffic Number Plate, License Plate
unwiding---skimming(remove the oil and aluminum coil and aluminum debris)---cleaning---neutralization
(neutralize the residue inside the degreasing tank)---cleaning---chromizing(form chelete film to enhance adhesion
between aluminum plate and coating)---drying---baking---cooling(by blowing, soaking and circulating water guiding system)---winding
A. From raw materials to process treatment, we cooperate with well-known brands with stable quality and reputation of the industry.
B. Adopting the German technology, through the three-times coating and baking, 12 testing procedures to ensure that no paint shedding,
bumps, coating voids.
C. The advanced colorimeter and error-detecting facility on thickness to ensure the quality.
D. The introduction of 8 advanced production lines from Germany, including four color layer lines, two cutting lines, two embossing lines,
and a new production line of the protective film.
E. Full sets quality inspection: include the control of raw materials, the measurement of thickness and color difference during production,
as well as the measurement of thickness and bending of products before packing.
Customerized Package & Delivery
Standard sea export packing.
1. Craft Paper Coverage
2. Wood frame reinforcement.
3. Steel ring attached to protect the edge.
4. Non fumigation pallets.
5. Moisture-proof measures.
1.0mm Thick Embossed Surface Black, White Color Aluminum Sheet for License Plate
Contact Us for Sample & Price !