The aluminum veneer curtain wall adopts high-quality and high-strength aluminum alloy plate, its common thickness is 1.5, 2.0, 2.5, 3.0 MM, and the model is 3003, and the state is H24. Its structure is mainly composed of panels, ribs and corners. The corners can be bent or stamped directly from the panel, or they can be riveted on the small edge of the panel. The ribs are connected with the welding screws behind the board surface (screws are directly welded on the back of the board), making it a firm whole, which greatly enhances the strength and rigidity of the aluminum single board curtain wall and guarantees smoothness during long-term use. Degree and wind resistance. If noise insulation is required, high-efficiency insulation and insulation materials can be installed inside the aluminum plate.