1. SAP Solid Aluminum Panel (Thickness: 2.0, 2.5, 3.0mm)
Solid aluminium panels are a sustainable alternative for other panels for ventilated facades.
Coil coated panels are available up to 3.0 mm as semi-finished aluminium products. Alloys, mechanical properties and coating materials have been carefully geared to the needs of facade cladding.
2. Aluminum Honeycomb panel (Thickness: 0.7mm/1.0mm)
is an aluminium composite panel consisting of two cover sheets and a honeycomb core of aluminium for a variety of applications in transport and industry or architecture,
showing excellent product properties such as extraordinary flatness, large variety of colours and high formability.
3. Aluminum Sandwich Panel (Thickness: 0.5, 0.6, 0.7mm)
A structural insulated panel, or structural insulating panel(SIP), is a form of sandwich panel used in the construction industry.
SIP is a sandwich structured composite, consisting of an insulating layer of rigid core sandwiched between two layers of structural board, used as a building material.
4. ACP Aluminum Composite Panel (Thickness: 0.2mm - 0.5mm)
made of aluminium composite material (ACM), are flat panels consisting of two thin coil-coated aluminium sheets bonded to a non-aluminium core. ACPs are frequently used for external cladding or facades of buildings, insulation, and signage.
5. NCP Non Combustible Panel (Thickness: 0.5mm - 1.5mm)
NCP is manufactured from high grade Aluminium throughout with skin thickness of 0.7mm top skin and 0.5mm rear skin, separated by a 'egg carton type' Aluminium core. Unlike other non-combustible and fire proof panels and sheets
NCP Aluminium does not use mineral core fillers to achieve fire resistance and is therefore lighter in weight with equal or better structural strength.
NCP is prefinished on the front skin during manufacturing with a 3-coat PVDF coating, available in a wide range of standard colours with customised colour and finish options.
