Color coated aluminum roofing sheet
Time: 2019-11-20 12:00 Views: 278
Color coated aluminum roofing sheet
Specification of color coated aluminum coil and strip
width up to 1.6meters
PE: >=16micron, PVDF: >= 25micro
accoding to customer's request, can print customer logo
Structure matt, anthracite grey, red, green, blue, silver
as customer's request
1000series, 3000 series, 8000series, etc
Coating Hardness (pencil resistance)
more than 2h
AC, PE, HDPE, PVDF, FEVE, Epoxy, etc
no peeling or cracking(50kg/cm, ASTMD-2794:1993)
No change within 200 times
The introduction of raw materials
1. Coating paint
The coatings used to make color-coated aluminum coils, including PE, PVDF, Epoxy, AC, and PU, are all produced by ourselves.
The raw materials for making paint are partially produced domestically, and some are imported from the United States and other countries.
We cooperate with China Aluminum,Weiqiao Aluminum ,South Mountain Aluminum ,
Rui Min Aluminum , Southwest Aluminum ,Fuhai Aluminum Etc.
Production line introduction
4 color coating lines, 2 slitter lines and 2 embossing lines. 1 new production line of protective film, imported from Germany.
Production line 1
Conventional production of primer 10-11 topcoat 15-16 total film thickness not less than 25 μm
Alloy:3000 Series h24
Notice:roofing products need have prodective film
Maximum Coating Range:Double coating on back +double coating on top Equipment:One bottom coating (4 roll) two top
coating (4) two back coating(3roll) one printing equipment
Main Product:curtain wall
Primer minimum 13μm , Top coating 15-16μm can Guaranteed performance, Printing varnish11-12μm , Total coating thickness 40μm
Equipment:One bottom coating , two top coating , two back coating, Three Printing equipment
Printing Scope:three color stone grain and double color wood garin,
Double coating on back( ≤1.2mm)+double coating on top
Production Scope:1. Ceiling, 2.roller shutter, 3.aluminum strip
Slitting deviation control ±1mm , wasted side≥2 mm
Production line 4
Width: within 1600mm
Size deviation control: Length ±1mm.
Quality control intoduction
A. Testing before producing
1.Aluminum. Into the factory inspection items: appearance quality, width, thickness, T-bending, and mechanical properties
2. Paint. Into the factory test items: dry film, color, T-bend, wipe, hundred grid, boiled, anti-oil effect. The production line
have to check the paint which must be stirred 30 minutes earlier.
3. Protective film. Into the factory inspection items: appearance packaging, protective film viscosity (sampling)
4. other raw materials: skimming, passivation, glue, PVC film.
5. order review. For special requirements, the line speed, dry film and so on.
B. Testing during the producing
1. Initial inspection includes film thickness, color difference, board quality and MEK, gloss of finished product
2. Collect head and tail sampling to detect color difference, dry film thickness, gloss, T-bend, wipe, hundred grid, boiled, impact, etc.
3. Observe if there are defects on the finished board surface and avoid defects such as paint void (holiday) and flaws on the board surface.
4. After completing the product, fill in the certificate (qualifier), collect the head and tail sample, test the sample, and establish records according to the standard.
C. Testing after the producing
1.Review and test items such as dry film, color, gloss, T-bend, wipe, boiled, hundred grid, finished product thickness
2. The finished product testing: mainly for the customer's special requirements, appearance quality, Color difference, meters, weight and so on.
Standard seaworthy export packing, wooden pallets with plastics protection for the sheet/plate;
15-20MT can be loaded into 20'container and 21-30MT is more suitable in 40'container;
The other packing can be made based on the customer requirement.
3~8 days workdays( in Stock);
10~25days workdays( out of Stock).
Means of transportantion
By sea, Main port:
By rail, Inland port:
At mohe port, Fuyuan port, Suifenhe port, Alataw Pass, Pingxiang port.
PVDF Coating: PVDF coating aluminum coil features with super durability and weather resistance,and better properties to
anti-acid, anti-alkali, keeping more than 15 years without fading in using as external wall cladding.
PE Coated: It can be classified matt and glossy according to the colors. The compact molecule structure assure paint, surface
Iuster and smooth,and assures good painting on the panel surface. With an warranty of 8-10 years for weather resistance,it is
specially applied to internal decoration and sign aborad.
Shandong Hengzhan Building Materials Co.,Ltd is one of the biggest company in color coated aluminum coil and single panel,
which has 16 years experience and covers an area of 60,000 square meters.
Shandong Hengzhan Building Materials Co.,Ltd are one of the earliest in color coated aluminum coil and panel, we have
continuous innovations on basis of rich experience and advanced international technology.
We cooperate with SWa and CHINALCO, pre-treament agent by HENKEL, and Nippon Paint, PPG paint a strategic cooperation.
Why choose us?
1. Product advantages:
a. Flatness: no deformation after shearing.
b. Weather ability: Polyester paint warranty 10 years, fluorocarbon paint warranty for more than 20 years.
c. Mechanical: Selection of high-quality aluminum, plastic and adhesives, the use of advanced composite technology
d. Top quality suppliers.
2. Company advantages:
a. 16year experience in Color Coated Aluminum Coil
b. OEM and ODM as customers requirement
c..ISO9001 and ISO14001,OHSAS ,SGS ect certifications
d. Famous brand materials and good service
e. Strict quality control with import test machines
f. Imported 8 sets automatic production line
g. professional sales team
Q: What is the payment term?
A: T/T or L/C
Q: Do you offer sample?
A: Of course, we provide samples for free.
Q: Can i buy installation accessories from you?
A: Yes, we provide wet wall and dry wall system installation accessories.
Q: Why can i trust you and place order with you?
A: From 2002 to 2018 is with 16 years experience in this industry, we have served clients from more than 100 countries,
Hengzhan is well-known for it's quality and Hengzhan tea win clients' trust by honesty and down to earth business style.
Q: Can we mix the different thickness: different color into one container?
A: Yes, no problem.
Q: What's the capacity?
A: 2000 pieces per day.